Skip to main content

PDIADI | National Driving Instructor Development

ADI Part 3 Test Tips: How to Pass First Time

Looking for ADI Part 3 test tips that actually move your score? The Part 3 is the last of the three qualifying tests to become an Approved Driving Instructor, and it is the one most PDIs find hardest. This guide covers how the test is marked, the 17 competencies on the ADI Part 3 marking sheet, the most common fail reasons, and 12 practical tips from trainers who have coached hundreds of PDIs through it.

The ADI Part 3 is a teaching test, not a driving test

A DVSA examiner sits in the back and watches you give a real, client-centred lesson to a real pupil for about 45 minutes. They are not marking your pupil’s driving. They are marking how well you help your pupil learn.

That is where most PDIs go wrong. They prepare a polished, scripted lesson and deliver it at the pupil, instead of building it with them. The tips below focus on what the examiner actually scores.

How the ADI Part 3 test is marked

How the lesson runs

StageTimeWhat you do
Goal setting3 minutes maxAgree the lesson goals and how risk will be shared
DrivingAbout 40 minutesYour pupil drives; you coach, give feedback and stop safely if needed
Reflection3 minutes maxYour pupil reflects on how they did

You can recap a manoeuvre from a previous lesson, but you cannot spend the whole lesson on one.

The 17 competencies on the ADI Part 3 marking sheet

The examiner scores each of the 17 competencies from 0 to 3, so the maximum score is 51.

CategoryCompetenciesWhat the examiner asks
Lesson planning4Did you find the pupil’s goals and needs? Was the structure right for their ability? Were the practice areas suitable? Did you adapt the plan when needed?
Risk management5Did the pupil understand the risks and who is responsible for them? Were directions clear and in good time? Were you aware of the surroundings and the pupil’s actions? Were interventions timely and appropriate? Did you give enough feedback on safety-critical moments?
Teaching and learning strategies8Did your style suit the pupil? Did you get them to analyse problems and take responsibility? Did you use examples and opportunities? Was technical information accurate? Was feedback timely? Did you answer their questions? Were you non-discriminatory? Did they reflect at the end?

ADI Part 3 pass marks

ScoreResult
0 to 30Fail
31 to 42Pass, Grade B
43 to 51Pass, Grade A

You fail automatically if you score 7 or less in risk management, even if your total is 31 or more. You also fail if the examiner has to stop the lesson because someone is in danger. (Source: GOV.UK: ADI part 3 test)

12 ADI Part 3 test tips that move your score

Lesson planning

  1. 1. Let the pupil set the goal. Ask what they want to work on and why, then agree it together. If you announce the topic, you lose marks before the car moves.
  2. 2. Pick a pupil whose level you know well. You need a goal they can make real progress on in 40 minutes. Too easy and there is nothing to teach; too hard and you will spend the lesson intervening.
  3. 3. Choose the route for the goal. Roundabout work needs roundabouts. Drive the area beforehand so you know where the learning opportunities are.
  4. 4. Change the plan when the pupil needs it. The examiner wants to see you adapt. If the goal is met early or proves too much, say so and agree a new focus. Read more in Can you create a lesson plan for your Standards Check or Part 3?

Risk management

  1. 5. Agree who does what, out loud. Before you set off, agree how much help the pupil wants and what you will do if you need to take control. Vague agreements score badly.
  2. 6. Give directions early and clearly. Late or confusing directions are a risk management fault, not a teaching one. Practise your wording until it is automatic.
  3. 7. Talk through safety-critical moments. If you had to intervene, pull over and discuss what happened and why. Ignoring it can cost you a whole category.

Teaching and learning strategies

  1. 8. Ask more, tell less. Open questions like “What did you notice on that approach?” show client-centred learning. A lecture does not.
  2. 9. Use what happens on the road. A cyclist, a bus pulling out or a missed signal is a teaching moment. Use real examples rather than hypotheticals.
  3. 10. Give feedback the pupil can act on. “Good” tells them nothing. “Your speed on the approach gave you time to look right” does.
  4. 11. Answer every question. If the pupil asks something, follow it up there and then, or agree when you will come back to it.
  5. 12. Leave time to reflect. In the last 3 minutes, ask the pupil what went well, what did not, and what they will work on next. Do not do the reflecting for them.

Want to practise these with an expert? PDIADI runs live CPD workshops on Part 3, risk management and client-centred learning, led by experienced ADI trainers.

Browse all PDIADI workshops

Common reasons PDIs fail the ADI Part 3

Fail reasonWhat it looks likeThe fix
Low risk management scoreNo clear agreement on risk; late directions; missed hazardsAgree risk sharing at the start and keep your eyes on the road, not the pupil’s feet
Instructor-led lessonYou set the goal, talk constantly and give the answersAsk, wait, then guide. Let the pupil work it out
Wrong pupilA pupil too nervous, too advanced or unable to drive for 40 minutesUse someone you have taught recently and know well
Rigid lesson planSticking to the plan when the pupil is struggling or boredCheck in during the lesson and adapt
Weak feedback“Well done” with no detail, or none at allSpecific, timely feedback linked to the goal
No reflectionRunning out of time or summarising for the pupilWatch the clock and protect the final 3 minutes
Car or document problemsCar fails the rules, wrong licence, no pupilCheck the GOV.UK car rules a week before

For more on the mistakes examiners see most often, read ADI Part 3 Training: FAQs to Avoid the Common Fails.

ADI Part 3 on-the-day checklist

  • Your trainee licence (or UK driving licence or passport if you do not have one)
  • A pupil who can drive for 40 minutes without frequent stops, and is not an ADI or PDI
  • L plates front and rear if your pupil is a learner (L or D plates in Wales)
  • An extra interior rear-view mirror fitted for the examiner
  • No warning lights, legal tyres, no space-saver spare
  • Taxed, MOT’d and insured for an ADI Part 3 test
  • Car tidy and smoke-free
  • Any dashcam faces outwards and does not record audio inside the car
  • Route and goal ideas planned, but not set in stone

If your car does not meet the rules, the test is cancelled and you pay again. Check the full list on GOV.UK.

ADI Part 3 FAQs

How long is the ADI Part 3 test?

The lesson lasts about 45 minutes, with your pupil driving for about 40 of them. The examiner then talks you through your result.

How many attempts do I get at the ADI Part 3?

Three. You must pass within 2 years of passing Part 1. If you fail a third time, you must stop giving paid lessons straight away and start again from Part 1.

Who can I bring as my pupil?

A partly trained learner, a fully trained learner or a full licence holder. They cannot be an ADI or someone preparing for their own Part 3.

What happens if I pass?

You can apply for your first ADI badge. You must apply within 12 months, or you will need to pass all three tests again.

Do I need extra training if I fail?

If you chose option 2 (extra training) for your trainee licence, you must complete 5 hours of extra training before you retake the test.

Ready to pass your ADI Part 3 first time?

Want expert help? Lee Spary, the ‘ADI Doctor’, has spent nearly 20 years helping PDIs pass Part 3 and ADIs pass their Standards Check using coaching and client-centred learning. Book one of his workshops, or get one-to-one support through our Mentorship programme.

View all workshops